Wireless Transmission

Teradek Bolt 3000 3G-SDI | HDMI Video Transceiver Set | SDI | HDMI Wireless Video Tranceiver Set

Teradek

Bolt 3000 3G-SDI | HDMI Video Transceiver Set

SDI | HDMI Wireless Video Tranceiver Set

Product Code:

Product Discontinued

  • SDI | HDMI Wireless Video Tranceiver Set
  • Longer Range
    Transmit visually lossless video up to 3000ft with no delay
  • 20mhz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Added Broadcast mode
    allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality
  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included
Frequency Violations!

Anyone with a wireless mic knows about frequencies – not just finding a clear channel, but also getting the right licence to operate. In the world of video senders, the same two issues apply. Teradek helps you avoid crowded bands with Bolt XT’s spectrum analyser, but even more important is adhering to legislation governing frequencies. All Teradek wireless equipment, including the BOLT range, is FCC and CE certified. In addition to this, the BOLT range features advanced Dynamic Frequency Selection to ensure there is no interference with civilian navigation, maritime, weather, and military radar systems.

Bolt hits the 1km mark!

Teradek is proud to announce the Bolt 1000 and Bolt 3000, two new zero delay wireless video systems that can transmit up to 1000ft and 3000ft respectively. Both models offer greatly improved wireless performance at more affordable prices, while maintaining visually lossless image quality.

Teradek Bolt Firmware v3.1.6

New Features

  • Added support for Sony Venice Bolt models
  • Enabled ARRI metadata output on Bolt 10k RX

Changes and Improvements

  • None

Bug Fixes

  • None

Teradek Bolt Firmware v3.1.5

New Features

  • None

Changes and Improvements

  • Improved pairing status robustness
  • Updating channels message on front panel shortened to UPD to not block other info

Bug Fixes

  • HDMI signal from some Atomos devices was not detected properly
  • Devices could fail to connect after changing frequency configuration

Bolt Firmware v3.1.3

New Features

  • Initial production release for DSMC2 Bolt

Changes and Improvements

  • None

Bug Fixes

  • Fix Bolt 500 LT firmware upgrade reliability

Download the latest Firmware and Software

  • Bolt Pro 3000 3G-SDI | HDMI Video Transceiver Set
  • 1 x Teradek Protective Case waterproof with custom foam (12in x 9in x 4.5in / 30.48cm x 22.86cm x 11.43cm)
  • 5 x Wireless Antennas (2dBi 2.4/5.8GHz) - For RX
  • 2 x Wireless Antennas (2dBi 2.4/5.8GHz) - For TX
  • 1 x 2-pin Lemo to PowerTap 18 inch Cable
  • 1 x Hot Shoe Adapter (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 2 x SDI (BNC to BNC) Cable 10 inch
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x USB 3.0 Cable A to Micro B (3.ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1 Year Warranty
Back to Top

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.